Sun protection market
In recent years, consumers’ awareness of protecting their skin from sunburn, aging, and harmful UV rays has been gradually increasing. Sun protection has become a must-have step in both skincare and makeup, with consumers demanding all-season, all-day, and multi-scenario sun protection. They also require sunscreen products that are both soft and hard, aiming for a 360-degree, no-dead-angle, all-around sun protection effect.
Sunscreen raw material pain points
Titanium dioxide is a commonly used physical sunscreen ingredient that provides good protection against UV rays and is used in various sunscreen products. However, the titanium dioxide on the market is difficult to disperse and tends to agglomerate, resulting in poor skin feel and poor sun protection effect.
Sunscreen Raw Material Advantages
Mica and silica are the base materials, utilizing powder compounding, powder surface treatment, and other technological processes to evenly coat nano-titanium dioxide on the surface of the base material. Then, it is treated with wet surface treatment to obtain HA SS-01, which has better dispersion, skin feel, sun protection effect, and cost-effectiveness than ordinary titanium dioxide. It is used in various sunscreen products.
Product Characteristics
Physical Sunscreen
Titanium dioxide can effectively block UV damage to the skin by reflecting, scattering, and absorbing ultraviolet rays (especially UVB and some UVA)
Light and Breathable
Ultra-low particle size brings a light and breathable skin feeling, good dispersion, and no burden on the skin.
Waterproof and Oil Control
The combination of synthetic fluorophlogopite and silica, after wet surface treatment, has a better waterproof and oil-controlling makeup/setting effect, and the auxiliary surface settlement coated nano titanium dioxide exerts the maximum sunscreen effect.
No nano-size Distribution
Ultrafine synthetic fluorophlogopite has good adhesion to the skin surface, good transparency, relatively non-false white, and forms a protective film on the surface, which can effectively prevent harmful nanoparticles from penetrating into the skin dermis and causing damage to the skin.
Dispersivity
HA’s unique dispersion technology processing can disperse the agglomeration particles and improve the SPF.
Sun Protection Mica Formula
HA SS-01
Main Ingredients：SYNTHETIC FLUORPHLOGOPITE & SILICA & TITANIUM DIOXIDE & ALUMINA & TRIETHOXYCAPRYLYLSILANE
Its ultra-fine particle size delivers a lightweight, breathable feel on the skin. With excellent dispersibility, it feels weightless and non-burdening. The powder provides enhanced waterproof and oil-control properties for long-lasting wear, and it aids surface-treated nano titanium dioxide in achieving optimal sunscreen efficacy.
HA SS-02
Main Ingredients：TITANIUM DIOXIDE&ZINC OXIDE&ALUMINUM HYDROXIDE&STEARIC ACID & DIMETHICONOL
Unique combination of technologies of various powder micro-morphologies, providing a long-lasting makeup effect. Lightweight and breathable skin feel, excellent dispersion, and enhanced sun protection.
HA SS-05
Main Ingredients：TITANIUM DIOXIDE&ALUMINUM HYDROXIDE& STEARIC ACID&DIMETHICONOL
This formulation utilizes nano-sized titanium dioxide with a unique needle-like structure, which provides effective sun protection without leaving a white cast. It delivers a lightweight, breathable skin feel with excellent dispersibility, offering a smooth, silky sensation and even a soft-focus effect. SS-05 is a leap forward technical improvement, which solves the problem that powder cosmetics, such as sunscreen powder and powder, can not be applied evenly without sticking to the skin or holding the makeup.
Sunscreen Titanium White
HA TX-12AY
Particle size10-20nm
Main Ingredients：TITANIUM DIOXIDE & ALUMINUM HYDROXIDE & STEARIC ACID
Sheer transparency paired with powerful UV defense, in an airy, weightless texture that feels virtually imperceptible. It’s fine, silky touch adheres to the skin with second-skin comfort, bestowing a soft, satin-radiance finish.
HA TX-13AY
Particle size15-30nm
Main Ingredients：TITANIUM DIOXIDE & ALUMINUM HYDROXIDE & STEARIC ACID
Rutile multi-dimensional scattering technology effectively shields UV rays and provides all-around skin protection. The lipophilic texture penetrates quickly and blends naturally with the skin’s oil. Long-lasting protection, as light and insensitive as invisibility.
HA TX-24GD
Particle size20-40nm
Main Ingredients：TITANIUM DIOXIDE & SILICA & DIMETHICONE
The hybrid organic-inorganic coating technology provides extremely high visible light transmission and exceptional UV-blocking capacity. It delivers a cloud-like, weightless feel on the skin, with a texture that is fine, smooth as velvet, and imparts a luxurious, radiant glow.
HA TX-24GR
Particle size20-40nm
Main Ingredients：TITANIUM DIOXIDE & SILICA & TRIETHOXYCAPRYLYLSILANE
Formulated with an oil-loving base, it offers excellent sebum compatibility for seamless skin adhesion and the formation of a lightweight protective layer. This ensures long-lasting defense against environmental stressors while maintaining a fresh, non-greasy feel.
HA TX-24Y
Particle size20-40nm
Main Ingredients：TITANIUM DIOXIDE & STEARIC ACID
Lipophilic fusion for long-lasting protection with a fresh, non-greasy feel. A multi-dimensional scattering mechanism ensures broad-spectrum and highly effective UV blocking.
HA TX-38AG
Particle size30-80nm
Main Ingredients：TITANIUM DIOXIDE & ALUMINUM HYDROXIDE & SILICA
Water·skin-friendly, with an invisible barrier. Offers long-lasting efficacy and a fresh, non-sticky feel. Utilizing dual
Mechanisms of physical reflection and scattering efficiently block UV radiation to significantly reduce its damage.
HA TX-38AGD
Particle size30-80nm
Main Ingredients：TITANIUM DIOXIDE & ALUMINUM HYDROXIDE & SILICA & DIMETHICONE
Oil·skin-friendly, with an invisible barrier. Offers long-lasting efficacy and a fresh, non-sticky feel. Utilizing dual mechanisms of physical reflection and scattering, it efficiently blocks UV radiation to significantly reduce its damage.
HA TX 50AS
Main Ingredients：TITANIUM DIOXIDE & SILICA & TRIETHOXYCAPRYLYLSILANE
With highly efficient UVB-blocking capabilities and exceptional transparency, it is well-suited for a wide range of applications in the cosmetics industry, particularly in sun care products.
Zinc Oxide Sunscreen
HA ZNO-50AS
Main Ingredients：ZINC OXIDE& SILICA & TRIETHOXYCAPRYLYLSILANE
A specialized inorganic surface treatment endows the powder with exceptional dispersibility and transparency. Its lamellar structure further facilitates easy dispersion and even spreading in cosmetic formulations, enabling it to deliver its full UV shielding performance.
HA ZNO-40AS
Particle size≤40nm
Main Ingredients：ZINC OXIDE & TRIETHOXYCAPRYLYLSILANE
It possesses exceptional transparency and superior spreadability without leaving a white cast. Its chemically inert, hydrophobic structure ensures stable and safe performance, offering high compatibility with a wide range of formula ingredients.
HA ZNO-40GR
Particle size≤40nm
Main Ingredients：ZINC OXIDE & SILICA & TRIETHOXYCAPRYLYLSILANE
It features a lightweight texture that melts upon contact with the skin, offering smooth, seamless application for a natural and even complexion. It provides broad-spectrum sun protection, effectively blocking both UVA and UVB rays. The formula is gentle and boasts high photostability.
Sunscreen Titanium Dioxide Paste
HA TX-S1
Particle size20-40nm
Main Ingredients：TITANIUM DIOXIDE & SILICA & WATER & SODIUM POLYACRYLATE & PHENOXYETHA NOL
The unique lightweight texture is non-greasy and as transparent as air, providing the skin with a breathless “zero-sensation” experience. The formula is gentle and burden-free, compatible with various skin types.
HA TX-Y1
Particle size20-40nm
Main Ingredients：TITANIUM DIOXIDE & ALUMINUM HYDROXIDE & SILICA & STEARIC ACID & C12-15 ALKYL BENZOATE & POLYHYDROXY STEARIC ACID
The texture is lightweight with an airy feel, delivering a fresh and non-greasy finish. It effectively blocks UVB rays and offers excellent broad-spectrum sun protection. The formula system possesses outstanding physical and chemical stability, preventing product separation or degradation.
HA TX-Y3
Particle size20-40nm
Main Ingredients：TITANIUM DIOXIDE & ALUMINUM HYDROXIDE & STEARIC ACID & DIMETHICONE & LAURYL POLYGLYCERYL-3
POLYDIMETHYLSILOXYETHYL DIMETHICONE & POLYGLYCERYL-3 POLYDIMETHYLSILOXYETHYL DIMETHICONE
This composite system exhibits excellent stability and works synergistically to provide broad-spectrum UV protection, while significantly enhancing the formula’s skin feel and adherence. It offers high transparency without whitening, along with outstanding water resistance and photostability. The system is mild with low skin permeability, delivering a lightweight, non-greasy experience.
Sunscreen Zinc Oxide Paste
HA ZNO-X1
Particle size≤40nm
Main Ingredients：ZINC OXIDE & TRIETHOXYCAPRYLYLSILANE & C12-15 ALKYL BENZOATE & POLYHYDROXY STEARIC ACID
The texture is light and breathable, as if it were invisible, refreshing, and non-sticky. Exclusive to sensitive skin, build a daily invisible sunscreen shield.
HA ZNO-X3
Particle size≤40nm
Main Ingredients：ZINC OXIDE & TRIETHOXYCAPRYLYLSILANE & CYCLOPENTASILOXANE & LAURYL PEG-9 POLYDIMETHYLSILOXYETHYL DIMETHICONE
Provides stable broad-spectrum sun protection with long-lasting protection against full-band UVA. The formula HA has excellent light stability and a fine texture that does not clump to ensure long-lasting sun protection.
